QuickTherm underfloor heating  

 

QuickTherm underfloor heating consists of easy-to-lay system panels, which can be customised to the room without the use of tools. The system panels have integrated insulation and predefined pipe ducts. This allows low installation heights from 30 mm with strong stability.

Modern technology
QuickTherm underfloor heating has been optimised for dry construction and can be laid in the shortest time. This underfloor heating is also suitable for retrofitting in redevelopment work due to the low installation height and low weight.
The system panels are covered with a heat conducting layer made of aluminium. This ensures an even, quick and energy-saving transfer of heat to the floor covering. Laying clearances always remain the same size due to the predefined pipe ducts on the system panels. Complex measurement of the clearances is not required. This makes laying the underfloor heating easier and also ensures even distribution of heat.

For any floor covering
Due to specialised load distribution layers, QuickTherm underfloor heating supports any common floor covering, even direct laying of laminate and parquet on the system panels is possible.
 

High energy efficiency
QuickTherm underfloorh eating manages with low warm-up temperatures as a low temperature system. This ensures low losses in heat distribution and saves energy. This means the underfloor heating can be combined very efficiently with heating pumps and solar power.

Quick regulation
Thanks to the low installation height, the underfloor heating needs to heat up less volume so the heat can quickly reach the floor covering. Your room is heated to a cosy 20°C in just 30 minutes when it is used in dry construction.

  • Dimensions 1.000 x 500 x 30 mm
  • Thermal conductivity (W/mK) 0,035 W/mK
  • Thermal resistance 0,86 m² K/W
  • Compressive strength 200 kPa
  • Output(s) up to 158 W / m² (depending on load distribution layer & floor covering)