Introducing LoPro™Max – the ultimate, fully designed retrofit UFH solution

Many more properties can now enjoy the benefits of warm water underfloor heating thanks to LoPro™Max, an innovative new UFH system developed by Nu-Heat.

This revolutionary solution features the highest high heat output of any retrofit UFH system and offers fast response times equivalent to that of a radiator, all with a low height build up of just 22mm.

LoPro™Max is part of Nu-Heat’s market leading LoPro™ range of underfloor heating systems specifically designed for retrofit projects.  Due to the system’s impressive heat performance of 120W/m², it is ideal for older properties with lower levels of insulation or spaces with large areas of glazing where underfloor heating would not usually be a suitable option.

The system uses a vacuum-formed castellated panel design to securely hold the floor heating tube in place before covering in a specialist self-levelling compound, LoPro™QuickSet.  The compound is highly conductive and provides a robust and perfectly level floor surface which can be walked on after just eight hours and is ready for tiling within 72 hours – good news if your project is on a tight schedule.  LoPro™Max offers a flexible installation, simply laid through an existing building into a new extension, suitable for ground and upper floor levels over both solid and timber sub-floors.  The system is also suitable for all floor finishes.

The system integrates seamlessly with any radiator circuit and is the perfect partner for modern gas, oil and LPG condensing boilers.

The low running costs of LoPro™Max are a major incentive for any homeowner when compared to an equivalent electric underfloor heating system.  For example, a 30m² electric underfloor system would cost approximately £720 per annum to run.  LoPro™Max costs just £240 when working with a gas boiler – a huge saving of £480, or 30p per hour!

Nu-Heat creates a bespoke system design for every project as well as supplying everything you need to successfully install a LoPro™Max whole house system, including detailed design drawings, clear and concise manuals and LoPro™Quickset.  Support from the experienced Nu-Heat technical team over the phone is also available if needed.

Key features of new LoPro™Max:

  • High heat output – up to 120W/m²
  • Super-fast response time – equivalent to that of a traditional radiator system
  • The easy-to-use self-levelling compound can be walked on after just eight hours and provides a perfectly level surface ready for tiling after 72 hours
  • One third of the running cost of an electric UFH system
  • Virtually any floor covering can be applied over LoPro™Max
  • All this with a low height build-up of just 22mm

LoPro™Max is also available in OneZone packs, a perfect solution for installing UFH in single areas such as extensions or bathrooms.  OneZones are available in sizes 5m² - 60m² and can be ordered online at www.nu-heat.co.uk

Find out more about LoPro™Max and the entire LoPro™ range on Nu-Heat’s website www.nu-heat.co.uk/retrofit or call 0800 731 1976.

There are currently no comments for this article.

Login to comment. slider