Leading British Manufacturer Ideal Commercial Boilers has been creating heating solutions for over 100 years, all of which have been uniquely designed for the UK marketplace. The Evomax is the company’s flagship high efficiency condensing boiler model, offering one of the highest outputs of any commercial wall hung boiler on the market.
Designed for ease of installation, commissioning and servicing, the Evomax expands the options for commercial buildings, with available outputs ranging from 30kW to 150kW. In addition to its lightweight design, supported through quality build and aesthetics, siting is made easy with a selection of room-sealed and open flue system choices. The option of insulated Frame and Header Kits allow the Evomax to be installed in cascade formation, either back-to-back or in-line depending on the requirements of the plantroom, with a combined top capacity of 600kW. Even more flexibility is provided with the option of Low Height Frame and Header Kits, which ensure installation of the Evomax is made simpler in instances where there is reduced headroom or inconvenient sloping ceilings. They also expand the options so that a floor standing atmospheric boiler can be replaced with one or more wall hung high efficiency models.
In addition to flexible installation options, Evomax is Ideal Commercial Boilers’ highest efficiency boiler to date with seasonal efficiencies of up to 97.2%, exceeding those stipulated in Part L2 of the Building Regulations. Each boiler is capable of wider output modulation of 5:1, which ensures the load is matched closely to the building’s requirements to maximise system efficiency. This market-leading performance combines with low NOx emissions of less than 40mg/kWh to offer a boiler solution that qualifies for maximum BREEAM points. In addition, the high efficiency of the Evomax range still exceeds the stringent assessment criteria required for inclusion on the Energy Technology List (ETL), making these boilers eligible for the Government’s Enhanced Capital Allowance scheme.
Enhancing the efficiency of the Evomax still further is a comprehensive system of controls, which enable numerous operating parameters to be pre-set for both individual boiler and cascade installations. These include a modulating sequencer, room sensor, programmable room thermostat, outside sensor, tank sensor, safety interlock and pump kits. It is also easy to integrate each boiler with an existing BMS system via a 0-10V boiler control input.
Evomax can be installed directly on a wall or, alternatively, as part of a prefabricated floor standing frame complete with individual shunt pumps, single balance headers, sequence controllers, safety and isolating valves and a drain point. This offers an installation option that can reduce installation time for newbuild projects and also greatly minimise downtime when specified as a replacement for existing boiler plant.
* Terms and conditions apply