Andrews Water Heaters In Third New John Lewis Store

Andrews Water Heaters have supplied two gas-fired condensing water heaters to provide domestic hot water for the John Lewis department store in Cardiff.  Previously, similar models have been used in John Lewis shops at the Trafford Centre in Manchester, Aberdeen and Liverpool.

 

Completed in 2009, the four storey, 26,000sq.m Cardiff branch is Wales’s largest department store and John Lewis’s biggest shop outside London. It is located adjacent to the new £675m St David’s 2 retail development, linked to the original St. David’s centre which currently attracts 30 million visitors per year. In addition to washrooms and baby changing facilities, the Andrews water heaters also serve the Espresso coffee bar and Place to Eat public restaurant, as well as the staff restaurant which provides a full meal service to approximately 800 Partners (staff) employed at the Cardiff shop

 

The two Andrews SUPAflo water heaters were specified by the original consulting engineers who designed the system, based on the client’s satisfaction with units already in service at other locations. However, the project was subsequently taken over by Lateral Technologies Solutions. The units each have an output of 139kW and a recovery rate of 2,382 litres per hour through a temperature rise of 50oC. They were supplied for incorporation in a packaged plantroom which is located on the roof of the store. The plantroom was installed by Crown House Technologies whose Engineer commented, “I am very happy with the water heaters and I found the Andrews Water Heaters Service Department very helpful on one occasion when I had a query.” The Andrews SUPAflo condensing water heaters meet the client’s requirement for energy efficiency and their compact dimensions and square shape make them equally ideal for use in a packaged plantroom or a conventional plantroom with limited space.

 

SUPAflo from Andrews Water Heaters are a range of gas-fired high efficiency water heaters capable of supplying large volumes of hot water for a variety of commercial and industrial applications. They are low water content units with a copper or stainless steel finned tube heat exchanger and stainless steel headers and manifold. SUPAflo units may be operated either ‘instantaneously’, providing hot water on demand, or with a buffer storage  vessel  and  are  suitable  for  either vented or unvented systems.

 

The SUPAflo features the latest heating technology, with a downward firing, blown gas, pre-mix water cooled burner that fully modulates between 20% and 100% providing ultra low NOx and CO2 emissions   and a nett  efficiency of 104% at 60/75oC. In the latest range, there are four types available totalling some 25 models with outputs that range from 57 to 1,002 kW providing hot water recovery rates from 969 to 17,177 litres per hour at a temperature rise of 50ºC from a single unit. All models have a room sealed facility if required and, in addition to the standard equipment supplied also come with a gas filter and condense trap and each has the facility to control and powers its own Bronze UPS primary circulator. The comprehensive control panel indicates all operational and lockout status with full history and may be connected to the on-site Building Energy Management System.

There are currently no comments for this article.

Login to comment. slider